Quick Stats

Quick Stats

    You are here

    Rose Displays Adds to ZipLines Family

    The new products can be used with most store ceilings.

    Signware solutions provider Rose Displays, Ltd. has introduced two accessories for its popular ZipLine family of products: the ZipLine Mounting Plate and ZipLine Poles.

    The Mounting Plate was developed so that ZipLines can be hung from any plaster ceiling, and can be used with most store ceilings, whether standard grid or flat. The Mounting Plate is installed by screwing it onto your ceiling.

    Using ZipLine Poles, store staff can install or remove ZipLines safely and in seconds – without the need for ladders. According to Rose, it takes just a single twist of the pole for the ZipLine anchors to lock securely onto the ceiling grid or the mounting plate.

    The ZipLine Poles are available in two configurations – ZipLine Poles OneUp for graphics with one point-of-hanging or ZipLine Pole BiClops for those with two points-of-hanging. Both configurations come in lengths for ceilings of up to 10-feet, 14’-feet, or 18-feet in height. Rose Displays recommends using two ZipLines per graphic.

    ZipLine comes with 60 inches of cable that can be adjusted in approximately 3-inch increments, allowing for flexibility to accommodate various store ceiling heights in your roll-out.

    In addition to the new Mounting Plate, ZipLines are compatible with standard grid, Spider Track, and Tile Divider mounts. They are available in a stock off-white finish to match most standard grid ceilings, and custom colors also available (minimum quantities and an up charge apply).

    For additional information, call 1-800-631-9707 or visit the website at www.rosedisplays.com.

     

     

    Related Content

    Related Content